65
206-4310
MEDIA SHARE
Network
Pro:Centric
Media Share
Pre-loaded
Apps
Smart Share
Disable
Screen Share
Disable
DMR
Disable
Bluetooth Sound Sync
Disable
DIAL
Disable
STB Name
406KCEA6Q508
SoftAP
^
SOFTAP
Media Share /
Network
Pro:Centric
Media Share
Pre-loaded
Apps
ON
Use Default
Disable
Security Key
00000000
Wi-Fi Signal Strength
Not Used
Wi-Fi Channel
Auto
^
^
^
^
Notes:
•
Screen Share MUST be enabled in
addition to Smart Share in order for
guests to use Wi-Fi Direct.
•
If you enable Bluetooth Sound Sync,
a pop-up confirmation banner will be
displayed since enabling Bluetooth
Sound Sync renders Wireless LG
Sound Sync unavailable. Select
Yes
to continue.
^
^
^
^
^
IP Environment Setup (Cont.)
(Continued from previous page)
3. If you would like to enable SoftAP, complete the SoftAP access
configuration as follows:
• Select/highlight
SoftAP
and press
OK
on the Installer Remote.
• When you initially access the SoftAP screen (see example at
right), the OFF/ON toggle button at the top right of the screen is
selected/highlighted by default. Press
OK
on the Installer Remote
to turn SoftAP ON.
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default
field to “Enable” (the Security Key
field will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default field to “Disable.” Then, select the
Security Key
field and
press
OK
. In the data entry field, you can use the
number keys
on the Installer Remote to direct enter a numeric security key, or
you can use the arrow keys to select the appropriate alphanu-
meric characters—at least eight, but no more than 64—from the
pop-up virtual keyboard displayed at the bottom of the screen.
Note that the security key may not contain any special characters
(:, /, \, @, etc.). When you are done, select
Enter
from the virtual
keyboard, and then press
OK
on the Installer Remote.
• Select the appropriate values in the Wi-Fi Signal Strength, and
Wi-Fi Channel fields, as required.
4. If desired, you can specify a name for this STB so that it is easy
to identify and differentiate from other STBs/TVs for which sharing
has been/will be enabled.
Note:
By default, the STB name is the STB’s serial number.
However, if a room number is specified in the EZ-Manager Wizard
or in the General Menu / Room Info screen, the STB name is
changed to the room number.
To edit the STB name, use the Up/Down arrow keys to select the
STB Name
field, and then press
OK
. You can then use the number
keys on the Installer Remote to direct enter a numeric STB name, or
you can use the arrow keys to select the appropriate alphanumeric
character(s) from the pop-up virtual keyboard at the bottom of the
screen. When you are done, select
Enter
from the virtual keyboard,
and then press
OK
on the Installer Remote.
5.
Once all fields are completed as required, use the arrow keys on the
Installer Remote to return to the IP Environment Menu, as necessary,
or press to exit the IP Environment Menu.
Note:
While Smart Share, Screen Share, DMR, and Bluetooth Sound
Sync settings are clonable, DIAL and SoftAP settings, as well as the
STB name cannot be cloned.
