28
206-4310
(Continued from previous page)
3. If the STB is currently in Pass-through Mode, you would like to transfer (import) a “.tlx”
file to
the STB via the Ez Download utility, and you intend to use one or both of the STB’s Zoning
feature(s), assign the appropriate STB Zone # and/or Wi-Fi Zone # in the STB at this time. See
Reference section, “Using the STB’s Zoning Features,” for further information.
Note: In order for the proper location-specific STB Zone and/or Wi-Fi Zone profile
data to be applied, the Zone designation(s) must be assigned in the Target STB(s)
BEFORE you continue with the Ez Download utility.
4. I
nsert the USB memory device with the appropriate file(s) into either of the STB’s USB ports.
5. To access the STB Manager from the STB menus:
• Press
MENU
on the Installer Remote to display the STB setup menus (STB is in Pass-through
Mode) or the Function Menu (STB is not in Pass-through Mode).
• If the Quick Settings Menu is displayed at the right of the screen (i.e., the STB is in Pass-
through Mode), select the
All Settings
menu icon and press
OK
to access the advanced
STB setup menus.
• Use the arrow navigation keys to select/highlight either the
General
menu icon from the STB
setup menus or the
Safety
menu icon from the Function Menu. Then, press the number “
7
”
key a total of seven times.
Note:
Ez Download is always selected by default when you initially access the STB Manager.
Also note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Insert Background Image(s)
None
Update STB Software
STB_CPU_SW.epk
Update PTC Software
STB_PTC_SW.txt
Import Clone File
STB_IM.tlx
<
>
X
USB DEVICE
STB MANAGER
Ez Download
USB 1:
Device Name
Ez Download
Insert Background Image(s)
Update STB Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Image1.jpg Image2.jpg
Image3.jpg
Image4.jpg Image5.jpg
Image6.jpg
Image7.jpg Image8.jpg
Image9.jpg
6. If more than one USB memory device is currently connected to the STB, be sure to select the
USB device that contains the file(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the
USB DEVICE
button at the top right of the screen and
press
OK
. Then, use the Up/Down arrow keys to select the appropriate USB device from the
pop-up list of USB devices displayed at the top of the screen.
Ez Download Utility (Cont.)
(Continued on next page)
