•
Opens the list of POIs near the selected
point.
These are the POIs shown in the Popup
Info window.
If you want to add a new POI at the cursor,
you can do so by tapping “POI” in the bot-
tom right corner. It is only available in the
Map screen and if there is at least one POI
item near the Cursor.
• Add Cam
This button will place a speed camera at the
position of the Cursor.
A new window opens where you can set the
type of the camera (fixed, mobile, built-in, or
section control camera), the direction of the
monitored traffic (your direction, the oppo-
site direction, both directions or all direc-
tions), and the speed limit.
If the map contains speed limit information,
this will be the default value for Camera
Speed.
• Edit Cam
You can edit the parameters of the camera
near or at the Cursor, or delete it.
This menu point replaces “Add Cam” and is
available only if the selected point is near or
at a speed camera. A window will open up
that contains the same settings as in Add
Cam. In addition, it will have a Delete button
that removes the camera from the map.
• Add POI
Opens the new POI capture window to let
you add the selected map point to the list of
your user points.
This menu point is only available on the
Map screen and if there are no POIs near
the cursor (i.e. only the address is shown in
the Popup Info window).
Getting started with navigation
16
