5.
This button opens the Menu screen.
The Menu will be described in “Navi
Menus”.
6. Zooms in
Tap “Zoom in” button to increase the detail
of the map view.
7. Battery status
The status of the battery is also shown by
the Navigator.
You can estimate the available power
reserve from the length of the bar inside.
Some examples:
Battery is not charging, but it is at full
capacity.
Battery in not full, but there is
sufficient reserve capacity.
When the inside of the battery turns
black, the battery needs recharging.
8. Current street
This field of the Map screen shows the
name or number (as available) of the cur-
rent street or road you are driving on.
Note
Some roads have an alternative name (or
number).
This is normally shown together with the
primary name in this field.
You can hide these alternative names in
“Map” (Page 31).
9. Current location
Current location in Vehicle Mode.
10. Travel and Route data
The contents of these three fields are dif-
ferent when cruising (without an active
route) or navigating (following an active
route).
While cruising, the fields show the present
speed, the current speed limit and the time
of day.
11. Next street
This field shows the road or street that
comes next in the route itinerary. If you are
not yet in the settlement where this next
street is, the Navigator will display the
name of the settlement instead of the
name of the road or street.
The start pont, via points and the
destination
These points are represented by flags.
Cursor
If you tap the map somewhere or select one
specific item in “Guide to” menu, it will become
the selected point on the map, marked with a
small red dot and radiating red circles to make
it conspicuous. You can use this point as start-
ing point, via point or destination for your route,
you can search for a POI near it, mark it with a
pin, or save it as a POI.
Marked map points (Pin)
The Cursor can be marked with a Pin.
Pins are shown as being stuck in the map. A
Pin is visible at all zoom levels and remains in
its position until you unpin it, or delete all Pins
in “User Data Management” Setup. (Page 34).
•
Start pont : Blue
•
Via point :
White
•
Destination : Red
Getting started with navigation
14
