3-4
COMPONENT ACCESS
REMOVING THE CONTROLLER
REMOVING THE CONTROLLER
1. Turn off the electrical supply going to the range.
2. Open the oven door.
3. Remove the 2 screws located at the front side of
the cooktop.
4. Remove the 4 screws located under the controller.
5. Pull the controller from the range
Pull
6. To remove the controller
a) Pull out the knob of Lower Oven and remove
the 2 screws of Knob Housing
b) Remove the 2 screws on the controller
c) Unplug the connector of Variable Thermostat
and remove it from the controller
d) You can remove the controller after unplug the
connectors of Main PCB and Cooktop.
REASSEMBLY NOTE : When you reinstall the
controller make sure that the cooktop gasket is
fixed into the cooktop correctly.
Connector
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
Cooktop
Gasket
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
!
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
!