SAFETY
3-19
REMOVING THE V
REMOVING THE V
ARIABLE THERMOST
ARIABLE THERMOST
A
A
T
T
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall.
3. Pull the controller from the range.
(See page 3-4)
4. Remove the variable thermostat from the
controller.
5. Remove the right side panel from the range, (See
page 3-17) and you can see the sensor bracket
of variable thermostat.
5. Remove 2 screws of the sensor bracket
6. Remove the sensor of variable thermostat from
the sensor bracket.
7. Disconnect all wire from variable thermostat.
8. After replacing the variable thermostat, finally
check the electric test and wiring.
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
!
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
!
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Sensor bracket
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Pull
Position
Wire color
L1/H
VI
T2/T3
OR