Introduction
Connections
Installation
Setup
configuration
Operating
Client
Program
Additional
Information
Specifications
37
Assigning the IP Address to the
Camera
You can edit the IP address of the connected cam-
era as shown below.
1. Run the IP Finder program on the computer.
The IP Finder window is displayed.
2. Click [IP Find] button.
After a few seconds the found IP address is(are)
displayed in the list.
3. Double-Click the IP Address in the list.
4. Select type of IP Address to Dynamic IP Address
or Static IP Address.
5. Edit the IP Address, Default GateWay and
SubNet Mask options.
You can check the new IP address condition by
using the ping test. Click [Ping] and check the IP
condition.
6. Enter the password of the administrator.
7. Click [IP Change] to reset the IP address of
the camera. After a few seconds the [Camera
changed IP Address] message window is dis-
played.
8. Click [OK] to close the window.
9. Click [End] to exit the program.
Using the "CSMtoAVI" Program
You can convert from [csm] to [avi] format.
1. Run the "CSMtoAVI" program on the computer.
The [CSM to AVI Converter] window is displayed.
2. Select the CSM folder to open and select the AVI
folder to save.
3. Click [CSM->AVI Converter] button to start con-
verting.
4. Click [Exit] to exit the program.
Client
Program
Summary of Contents for LPT-DW113M
Page 44: ...P NO MFL30580181 ...