LG LPT-DW113M, Owner'S Manual

Page: 16 / 44

16
6. Click [Click Here!].
The Network Setting loading page is displayed.
After a few seconds, the home page of the cam-
era is displayed. In case of using the cross cable
the changed home page may not displayed, but
the new IP address of the camera is changed
correctly.
7. Disconnect the cross cable from the computer
and the camera.
8. Connect the Broadband router to the network
using the LAN cable (Straight cable or Cross
cable) and turns on the Broadband router.
9. Connect the camera to the LAN port of
Broadband router using the LAN cable (Straight
cable).
10. Connect the computer to the Broadband router
using the LAN cable (Straight cable).
11. Set the network configuration of the computer.
12. Start the web browser on the computer and enter
the assigned IP address of the camera.
The home page of the camera is displayed.
13. For more detail using the home page of the
camera, refer to [Setup configuration] and
[Operating].
Notes:
• You must set the port forwarding according to
the settings of the broadband router. Refer to the
manual of Broadband router for more detailed
settings.
• If you use the multi camera with Broadband rout-
er, you must set the web server port number for
each cameras and you will use the web server
port number to connect the camera.
For example: When the web server port number
is set to 85, enter [http://192.168.10.8:85]. The IP
format is the same as the broadband router.
<How to change the port number>
1. Select [Network Setup] option.
2. Select [User Port] option and enter the new
port numbers of the camera.
If you use the multi camera with Broadband
router, all port numbers will be different each
other. You can use the port number between
1024 and 65535 except between 1500 and
1510 that were used in this camera.
The recommended port number is from
49152 to 65535.
3. Click [Save] icon of the Port Setup option to
save the setting.