LG LPT-DW113M, Owner'S Manual

Page: 35 / 44

Introduction
Connections
Installation
Setup
configuration
Operating
Client
Program
Additional
Information
Specifications
35
• Audio: Select when you are authorized user
and the speaker and/or microphone is con-
nected.
- Disable: Not used.
- Single: Select when the speaker is con-
nected only.
- Two-way: Select when the speaker and
microphone are connected.
• ID / Password: Enter the ID and Password to
log-in the camera.
• Password save: Mark up when you want to
save the password.
Note:
After change the options, you must click [SAVE]
button to confirm the settings.
6. Click the [CONNECT] button.
Or, Click the [CANCEL] button to exit the connect
dialog window.
7. Click the [Off] button to disconnect the network
camera.
Setup the DW113 Viewer
• Folder Setup
- Recording Folder: Select the folder to save
the recording image.
If you want to change the recording folder,
click the folder icon and select the new folder.
- Capture Folder: Select the folder to save the
capture image. If you want to change the
capture folder, click the folder icon and select
the new folder.
• Recording Setup
- Forced Recording Time: Select the forced
recording time. If you set the forced record-
ing time, you can record during the selected
time.
- Motion Recording Enable: Mark up when you
want to record until the motion has detected
and select the recording time (10, 20, 30, 40,
50 or 60 Sec).
- Sensor Recording Enable: Mark up when you
want to record until the sensor signal has
input and select the recording time (10, 20,
30, 40, 50 or 60 Sec).
- Recording File Format: Select the recording
file format between “csm(Video)/csa(Audio)”
and “avi(Video only)”.
• Sensor & Motion Beep Enable: If you mark up
this option, make a sound and blink the live
screen in the DW113 Viewer when an sensor or
motion detect.
• Alert Time: You can set the alert time (10, 20, 30,
40, 50, 60, 120 or 240 Sec).
• Overwrite Enable: If you mark up, overwrite
recording is possible when the HDD space is
lower than the selected space of the [Disc space
to remain] option.
• Disc space to remain: Select for check the
remain space of HDD to record (700M, 1G, 2G,
3G, 4G or 5G).
• SAVE button: Click to confirm the settings.
• CANCEL button: Click to cancel the settings.
Client
Program