Operation and settings
17
Stream
Profile
Select the stream [Profile1], [Profile2], [Profile3] or [Profile4]
depending on Install Preset.
Note:
It is displayed the constraints according to the current preset
settings by mouse-over at the right-top of the current Preset.
- Applicable model: LND5110 / LNV5110R / LND5110R /
LNU5110R / LNB5110
Profile
Profile1
Profile2
Profile3
Profile4
Quad
Stream
SXGA @
30 fps
SXGA @
30 fps
SXGA @
30 fps
CIF @ 30 fps
Triple
Stream
SXGA @
30 fps
D1 @ 30 fps
SXGA @
30 fps
N/A
Pivot
SXGA @
30 fps
D1 @ 30 fps CIF @ 30 fps
N/A
High
Framerate
SXGA @
60 fps
D1 @ 60 fps
N/A
N/A
- Applicable model: LNB7210 / LNV7210 / LND7210 /
LNV7210R / LND7210R / LNU7210R /
LNV7210RH / LNU7210RH
Profile
Profile1
Profile2
Profile3
Profile4
Quad
Stream
1 080P @
30 fps
1 080P @
15 fps
720P @
30 fps
CIF @ 30 fps
1 080P @
30 fps
720P @
30 fps
720P @
30 fps
CIF @ 30 fps
Triple
Stream
1 080P @
30 fps
1 080P @
15 fps
720P @
30 fps
N/A
1 080P @
30 fps
720P @
30 fps
720P @
30 fps
N/A
Pivot
1 080P @
30 fps
N/A
N/A
N/A
1 080P @
15 fps
720P @
30 fps
CIF @ 30 fps
N/A
720P @
30 fps
720P @
30 fps
CIF @ 30 fps
N/A
High
Framerate
1 080P @
60 fps
N/A
N/A
N/A
720P @
60 fps
D1 @ 60 fps
N/A
N/A
> Enable: Click to activate the stream function.
> Video codec: Select the video mode (Codec) from the drop-
down list. The viewer can choose among MJPEG, H.264 and
H.264_HIGH.
> Resolution: Select the resolution from the drop-down list.
> Maximum frame rate: Set the frame rate of the image.
Note:
Refer to the table below for the supported Framerate.
If you enter the unsupported framerate, the less Encoding
Framerate than the input is applied.
For example, when 17 fps is entered, 15 fps will be applied.
Encoding
Framerate
Sensor Framerate
60
50
30
25
60
O
N/A
N/A
N/A
50
O
O
N/A
N/A
30
O
O
O
N/A
25
O
O
O
O
20
O
O
O
O
15
O
O
O
O
10
O
O
O
O
5
O
O
O
O
4
O
O
O
O
3
O
O
O
O
2
O
O
O
O
1
O
O
O
O
> GOP size: It means “Group of Pictures”. The higher the GOP,
the better is the video quality of the camera. Set the value
of GOP from 1 up to 60 depending on Install Preset settings.
This setting is valid for H.264 video format only.
> Quality: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
> Smart Codec: You can improve the image of specific area
to configure the Region or Face Detect. If you select the
[Region] option, the [Smart Codec (Region)] window is
activated.
Note :
•
When the video codec is H.264 or H.264_HIGH, the
Smart Codec can be selected.
•
Two areas can overlap and the sum of the two areas
have to be less than 30 % of the total area.
•
Smart Codec settings area is not maintained by the
screen change by the operation of Pan / Tilt / Zoom.
When reset the Pan / Tilt / Zoom, you need to reset the
Smart Codec settings area also.
> Stream quality: If the [Quality] option set to VBR, this
option is displayed. Select the stream quality from the drop
down box, the camera supports five types. (Highest, High,
Medium, Low and Lowest)
> Bit rate: If the [Quality] option set to CBR, this option is
displayed. If the Profile is set to [Profile1], can be set the
Bitrate value from 1 024 kbps to 10 240 kbps. In case of
[Profile2], [Profile3], [Profile4], can be set from 256 kbps to
10 240 kbps.
Note:
If the ‘Bit rate’ is configured too low with high resolution,
the actual frame rate will decrease because of narrow
bandwidth. So you need to set or change the ‘Bit rate’ to
high value.
JPEG Snapshot Quality
> Snapshot Quality: Select the quality of JPEG snapshot.
•
Save: Click this button to confirm the settings.
Summary of Contents for LNB5110
Page 40: ......
