14
Operation and settings
Maximum
Shutter
1/10 000 1/5 000 1/2 500 1/1 500 1/1 000
1/700
1/500
1/480
1/400
1/360
1/300
1/250
1/240
1/180
1/150
1/120
1/100
1/60
1/50
1/30
1/25
1/20
1/15
1/8
1/4
1/2
2/3
1
1.5
2
> Flickerless: Remove the band noise caused by fluorescent
light.
Note:
When the [IRIS] is set to [Manual], if the surrounding area is
bright, can be seen flicker even if the [Flickerless] is set.
In this case, set the [IRIS] to the [Auto].
•
Default: Click this button to restore the IP device back to original
factory settings.
White Balance
> Mode: Select [Mode] option on the [White Balance] menu,
then select the following mode.
- Auto: Adjust the white balance of the full image area.
Use this function in the environment by special lighting
lamp.
Note:
When a monochromatic object is caught on camera, the
object may seem faded.
In case of this, it is recommended to set to [ATW] mode.
- Manual: You can set the white balance options manually.
If the [Mode] option set to [Manual], [Red] and [Blue] are
displayed.
- ATW (Auto-Tracing White Balance): Adjust the white
balance by tracing the white area.
In the following conditions, may not work properly:
1. When the scene contains mostly high color
temperature objects, such as a blue sky or sunset.
2. When the scene is dim.
- ONE PUSH: If you select the [ONE PUSH] mode, you will
be able to set up the White Balance automatically.
> Red: Set the desired red value.
> Blue: Set the desired blue value.
> Color Temp: If the [Mode] option set to [ATW], this option is
displayed. Click to select the option.
- Indoor: Adjust the white balance according to the indoor
environment.
- Outdoor: Adjust the white balance according to the
outdoor environment.
•
Default: Click this button to restore the IP device back to original
factory settings.
Summary of Contents for LNB5110
Page 40: ......
