LG LCWW Operation & Maintenance Manual Download Page 37

Page: 37 / 119

4. CONTROL SYSTEM

ENGLISH

Names of color LCD screen display parts

Operation method selection display

Operation mode selection display

Current menu & present time display

Message display

Key menu bar

Machine type selection display

Displayed items

Figure 20 LED screen

①

Operation mode selection display

There are 3 operation modes, the first is Local operation to operate directly at the site, the second is Scheduled

operation to operate automatically following the reserved time and the third is Remote operation to operate from a

remote place. In the display screen the present operation mode is shown.

②

Machine type selection display

Out of 2 machine types of R134a and R134_D, one can be selected. (When selected, the main board is automati-

cally reset and changed to the selected model. _D indicates the model which uses two compressors.)

③

Operation mode selection display

There is only the cooling operation in the ventilation chiller, so only the cooling mode is displayed, and for low tem-

perature use, air conditioning and ice making modes are available.(Refer to the user setting in the main menu and

control mode setting)

④

Present time display

It displays the present year, month, day, day of the week, hour and minute.

⑤

Displayed item

Temperature, pressure, etc. data of various parts of the chiller are displayed.

⑥

Key menu bar

It displays functions of the menu operation key.

⑦

Message display

It displays the status of Run /Stop and operation mode, and messages such as Problem/Caution, alarm, etc.

Summary of Contents for LCWW
























































































































Search results

Summary of Contents for LCWW

Reviews:

LG LCWW, Operation & Maintenance Manual, Page: 37 / 119

Search results

Summary of Contents for LCWW

Reviews: