LG B2070 Service Manual Download Page 114

Page: 114 / 139

9. ENGINEERING MODE

- 113 -

9.4 Trace option [MENU 4]

This is NOT a necessary menu to be used by neither engineers nor users.

9.5 Call timer [MENU 5]

This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.

1) All calls

This displays total conversation time. User cannot reset this value.

2) Reset settings :

This resets total conversation time to this,[00:00:00].

3) DAI DOWNLINK :

Speech decoder test

4) DAI OFF

DAI mode off

9.6 Fact. Reset [MENU 6]

This Factory Reset menu is to format data block in the flash memory and this procedure set up the

default value in data block.

Attention

Fact. Reset (i.e.Factory Reset) should be only used during the Manufacturing process.

Servicemen should NOT progress this menu, otherwise some of valuable data such as

Setting value, RF Calibration data, etc. cannot be restored again.

9.7 S/W version [MENU 7]

This displays software version stored in the phone.

Summary of Contents for B2070












































































































































Search results

Summary of Contents for B2070

Reviews:

Related manuals for B2070

Brands by name

Popular brands

LG B2070, Service Manual

Search results

Summary of Contents for B2070

Reviews:

Related manuals for B2070

Brands by name

Popular brands