LG B2070 Service Manual Download Page 113

Page: 113 / 139

9. ENGINEERING MODE

- 112 -

9.3 MF mode [MENU 3]

This manufacturing mode is designed to do the baseband test automatically. Selecting this menu

will process the test automatically, and phone displays the previous menu after completing the test.

9.3.1 All auto test

LCD, Backlight, Vibrator, Buzzer, Key Pad, Mic&Speaker,

9.3.2 Backlight

LCD Backlight is on for about 1.5 seconds at the same time, thenoff.

9.3.3 Buzzer

This menu is to test the volume of Melody. It rings in the following sequence.

Volume 1, Volume 2, Volume 3, Volume 0 (mute), Volume 4, Volume 5.

9.3.4 Vibrator

Vibrator is on for about 1.5 seconds.

9.3.5 LCD

1) LCD

Main LCD screen resolution tests horizontally and vertically one by one and fills the screen.

9.3.6 Key pad

When a pop-up message shows ‘Press Any Key’, you may press any keys including side keys,

but not [Soft2 Key]. If the key is working properly, name of the key is displayed on the screen.

Test will be completed in 15 seconds automatically.

9.3.7 MicSpkTest

The sound from MIC is recorded for about 3 seconds, then it is replayed on the speaker

automatically.

Summary of Contents for B2070












































































































































Search results

Summary of Contents for B2070

Reviews:

Related manuals for B2070

Brands by name

Popular brands

LG B2070, Service Manual

Search results

Summary of Contents for B2070

Reviews:

Related manuals for B2070

Brands by name

Popular brands