LG 22LX570M Commercial Mode Setup Manual Download Page 11

Page: 11 / 80

206-4281

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the

Pro:Centric Server Admin Client User Guide

. This document describes only those settings that must

be specified on the TVs to enable Pro:Centric remote management and/or the Pro:Centric application.

• Remote management (TV E-Z Installation): The Pro:Centric server Admin Client provides remote

management facilities for downloading splash screen image and software/firmware updates as well as

facilities for downloading a Clone/Configuration (.tlx) file for FTG Mode via CPU configuration.

• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,

comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric

application settings are managed via the Pro:Centric server Admin Client.

The Pro:Centric server settings can be configured using one of the methods described below.

Note:

If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the

required value.

TV in Factory Default State

When the TV is in a factory default state, LG’s Setup Wizard (see pages 12 to 13) provides automated

or manual options for configuring the Pro:Centric server settings.

The EZ-Manager branch of the Setup

Wizard also provides a USB configuration option that enables you to configure a TV for FTG Mode via

CPU using a

Clone/Configuration (

.tlx)

file stored on a USB memory device. The “

.tlx”

file incorporates FTG

Installer Menu settings, including Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL, which

are used to set up the TV’s Pro:Centric feature.

TV in Pass-through Mode

If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL

to the appropriate values. See Installer Menu information on pages 29 to 39 for further details. Also, as

necessary, refer to “Custom Master TV Setup” on pages 40 to 42 and/or cloning information on pages 43

to 46.

Note:

When the TV is in either Pass-through Mode or FTG Mode via CPU, you can also leave Installer

Menu item 119 DATA CHANNEL set to its default value (255) to enable the TV’s Data Channel Auto Search

feature to set the DATA CHANNEL value. See item 119 description on page 39 for additional information.

TV in FTG Mode

If the TV is in FTG Mode (via CPU or EBL), use the appropriate FTG application software to update Installer

Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the

FTG Installer Menu settings to the TV in accordance with the FTG Mode of configuration. Refer to the

FTG Mode overview on

pages 7 to 9 for further information on FTG Mode operation and configuration

Also—for FTG Mode via CPU only—see note above regarding the option to use the TV’s Data Channel

Auto Search feature to set the DATA CHANNEL value.

Pro:Centric Operation (Cont.)

Summary of Contents for 22LX570M

















































































Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands

LG 22LX570M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands