LG 22LX570M Commercial Mode Setup Manual Download Page 79

Page: 79 / 80

206-4281

Document Revision History / Open Source Software Notice

Document Revision History

Date

Description

December 2015

Revision A: New document

May 2016

Revision B: Installer Menu and pillow speaker interface updates

Product documentation is available online at:

www.lg.com/us/commercial

Open Source Software Notice

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please

visit http://opensource.lge.com. In addition to the source code, all referenced license terms, warranty disclaimers and copyright

notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering

the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@

lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Summary of Contents for 22LX570M

















































































Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands

LG 22LX570M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands