LG 22LX570M Commercial Mode Setup Manual Download Page 40

Page: 40 / 80

206-4281

Custom Master TV Setup

This section describes how to create a customized Master TV Setup for cloning purposes when

the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed

via USB memory device / “.tlx” file.

The Master TV Setup may be exported to a Clone (.tlx) file,

which can then used (i.e., imported) to configure either TVs that are to remain in Pass-through

Mode or TVs that are to be configured for FTG Mode via CPU.
Cloning requirements and procedures are described in detail on pages 43 to 46.

Note:

You can also use the FTG File Manager to create an FTG Configuration (.tlx) file f

FTG Mode via CPU configuration/cloning purposes, if desired (see pages 47 to 48). However,

it is not possible to customize TV setup menu settings in the FTG File Manager. If you wish to

include customized TV setup menu settings in the TV configuration, in addition to the channel

lineup and Installer Menu settings, perform the Master TV Setup procedure to create a Clone (.tlx)

configuration file.

Before You Begin

• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel

Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

•

A Clone (.tlx) file comprises Installer Menu settings and all TV sources’ (analog, digital, AV,

HDMI, etc.) clonable setup menu settings. See also “Clonable TV Setup Menu Features” list

below.

•

If the “.tlx” file (either a Clone or FTG Configuration file) to be imported on the Target TV(s)

contains an FTG Channel Map, the Target TV(s) will be configured for FTG Mode via CPU,

though as part of the import process, you will have the option to select either logical or physical

channel tuning. If you would like the Target TV(s) to remain in Pass-through Mode, the “.tlx” file

should not include an FTG Channel Map.

Clonable TV Setup Menu Features

Channel

Auto Tuning (Channel Lineup)

Manual Tuning

Channel Edit

Channel Label

Picture

Picture Mode

Audio

Sound Mode

Sound Effect

Auto Volume

Sound Out

AV Sync Adjust

Sound Optimizer

Time

Clock

−

Clock Mode (Auto/Manual)

−

Time Zone

−

Daylight Saving

Auto Off

Option

Language

Caption

Standby Light

Note:

Some menu options vary between digital and analog channels and Aux inputs.

Summary of Contents for 22LX570M

















































































Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands

LG 22LX570M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LX570M

Reviews:

Related manuals for 22LX570M

Brands by name

Popular brands