LG-Ericsson IPECS WIT-400HE User Manual Download Page 21

Page: 21 / 121

Chapt

Getting Started

Battery and Charger

Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows

you to recharge your battery before it is fully drained.

WARNING:

Use only Ericsson-LG approved battery, charger, and Power

Adapter with your phone. The failure to use a Ericsson-LG approved battery,
charger, and Power Adapter may increase the risk that your phone will
overheat, catch fire, or explode, resulting in serious bodily injury, death, or
property damage.

When the battery reaches 10% of its capacity, your phone makes a

sound and displays a message. When there are approximately four

minutes of talk time left, the phone sounds an audible alert and then

turns off.

Installing and Removing the Battery

Always turn off your phone before installing or replacing the battery.

To install the battery:

1. With your thumb, press down on the battery cover on the back of

your phone ( ) and slide it downward to release it ( ).

Battery cover

Summary of Contents for IPECS WIT-400HE


























































































































Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands

LG-Ericsson IPECS WIT-400HE, User Manual

Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands