LG-Ericsson IPECS WIT-400HE User Manual Download Page 106

Page: 106 / 121

Chapter 11

Settings

Network Information

This menu allows you to view the information on using the network

configuration.

1. Press

> Settings > Network Information

2. Displays the IP address, netmask, gateway, DNS1, and DNS2.

•

The DNS2 property defines the secondary DNS address.

3. Read the information provided on the phone’s display and press

to return to the previous menu.

Phone Version

This menu allows you to view the software version of your phone.

1. Press

> Settings > Phone Version

2. Displays the software version, MAC address, and serial number of

your phone.

3. Read the information provided on the phone’s display and press

to return to the previous menu.

Reset Settings

This menu allows you to reset the phone to its original state.

1. Press

> Settings > Reset Settings

2. If you are certain you want to reset the phone, select

Yes

•

Enter your security code as it is a required field and then press .

•

Note:

Be careful when using this menu, after rebooting all your

settings are initialized to their original values.

or
Select

to cancel and return to the previous menu.

3. Press to save the date and time.

Summary of Contents for IPECS WIT-400HE


























































































































Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands

LG-Ericsson IPECS WIT-400HE, User Manual

Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands