LG-Ericsson IPECS WIT-400HE User Manual Download Page 3 | Manualshive

Page: 3 / 121

background image

iii

there is no guarantee that interference will not occur. If this equipment does

cause interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to correct the

interference by on of the following measure;
1.   Reorient or relocate the receiving antenna.
2.  Increase separation between the equipment and receiver.
3.   Connect the equipment to an outlet on a circuit different from which the

receiver is connected.

4. Consult the dealer or an experienced radio/TV technician.

Compliance Statement for Canada

This Class B digital apparatus meets all requirements of the Canadian Interface-

Causing Equipment Regulations. "Cet appareil de la classe B respecte toutes

les exigences du Reglement sur le matereil brouiller du Canada." The device is

certified to the requirements of RSS-210 for 2.4GHz spread spectrum devices.

The use of this device in a system operating either partially or completely

outdoors may require the user to obtain a license for the system according to

the Canadian regulations. For further information contact your Local Industry

Canada office.

European Union Declarations of Conformity

Ericsson-LG Co., Ltd. declares that the equipment specified in this document

bearing the "CE" mark conforms to the European Union Radio and Telecom-

munications Terminal Equipment Directive(R&TTE 1999/5/EC), including the

Electromagnetic Compatibility Directive(2004/108/EC) and Low Voltage Direc-

tive(2006/95/EC). Copies of these Declarations of Conformity (DoCs) can be

obtained by contacting your local sales representative.
The Products is CE marked.
The product fulfills the essential requirements of the harmonized standards

shown above.

Product Safety Instructions

This product complies with and conforms to the following international Prod-

uct Safety standards as applicable:
Safety of Information Technology Equipment, IEC60950-1, including all relevant

national deviations as listed in Compliance with IEC for Electrical Equipment

(IECEE)
Safety of Information Technology Equipment, CAN/CSA-C22.2 No. 60950-1/UL

60950-1
Specific absorption rate (SAR) , in Compliance with E A1,EN622091-1,

FCC OET Bulletin 65 Supplement C, IEEE 1528 and ANSI/IEEE C95.1,C95.3
Hearing Aid Comparability and Volume Control, in Compliance with IC CS03

Part V Issue 9

«
1
2
3
4
5
...
»

Summary of Contents for IPECS WIT-400HE


























































































































Reviews:

No comments

Related manuals for IPECS WIT-400HE

Brand: Ulefone Pages: 32

Brand: Archos Pages: 115

selfie dexule flash

Brand: ultron Pages: 2

POLYCOM VTXTM 1000

Brand: Polycom Pages: 2

Brand: Alcatel Pages: 2

Brand: DMP Electronics Pages: 46

Brand: HART Pages: 22

Brand: QUO Pages: 9

Brand: Aastra Pages: 48

Brand: Zte Pages: 114

Brand: Brother Pages: 40

Brand: Sanyo Pages: 2

Brand: Sanyo Pages: 2

Brand: Sanyo Pages: 2

Brand: Motorola Pages: 62

Brand: Motorola Pages: 2

Brand: Motorola Pages: 150

Brand: Motorola Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands