LG-Ericsson IPECS WIT-400HE User Manual Download Page 29

Page: 29 / 121

Chapter 2

Getting Started

Headset with Mic

The headset included with phone features a microphone and an

integrated button that allows you to answer and end calls easily.

Connecting the Headsest

►

Open the headset jack cover and flip it over ( ) and plug the head-

set into phone’s headset jack ( ).

CAUTION:

Using incompatible accessory may damage the phone.

WARNING:

Do not insert any external substance except headset in

the headset jack. Inserting anything except for headset provided by

general maker may cause severe damage the phone.

•

Plug in the headset to make or answer a phone call. Callers hear

you through the headset microphone.

•

Even though the headset is plugged, incoming call ring tone is

heard through the speaker, not through the headset.

Press the mic button to control answer, hold, switch and end calls.

Standby mode:

Answering an incoming call

Press once.

Go to the Call List

Press once.

Redial call the most recent

number in the Call List

Press and hold for about two seconds.

During a call:

End the current call

Press and hold for about two seconds.

Mic button

Headset jack

Headset plug

Cover

Summary of Contents for IPECS WIT-400HE


























































































































Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands

LG-Ericsson IPECS WIT-400HE, User Manual

Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands