LG-Ericsson IPECS WIT-400HE User Manual Download Page 30

Page: 30 / 121

Chapter 2

Getting Started

Phone Carrying

Using the Wrist Strap

Carry your phone with the wrist strap that included in your package.

This polyester carrying strap attaches easily to your phone.

To connect the wrist strap:

►

Thread the small loop of the wrist strap through the strap hole on

the phone ( ) and pull the strap through the small loop until the

strap is firmly secured ( ).

Using the Belt Clip (User Opinions)

The phone belt clip allows you to clip your phone to your

belt or porket when you work around the office.

Note:

This belt clip is not included in your package.

To attach the belt clip:

►

To attache the belt clip remove the protective cover from the back

of the phone as indicated below ( ) then tighten the screw that

provided with the belt clip ( ). Place the belt clip, align the screw on

the back of the phone and push it up hard until the belt clip is firmly

secured ( ).

Wrist strap

Strap eyelet

Belt clip (option)

Screw

Screw hole

Protective cover

Paper clip

Summary of Contents for IPECS WIT-400HE


























































































































Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands

LG-Ericsson IPECS WIT-400HE, User Manual

Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands