LG-Ericsson IPECS WIT-400HE User Manual Download Page 110

Page: 110 / 121

102

Appendix A

Useful Information

Troubleshooting

If you experience any problems with the normal use of your phone,

you should remove and replace the battery, then turn on the phone.

Symptoms

Troubleshooting Guide

Failed to scan AP

Scanning access point is failed. Try again and if it
fails too, check the access pont status.

Encryption key is

not valid

The encryption key is not matched with access
point’s. Please check encryption key of the phone.

DHCP Failed

The phone; didn’t received response for the IP
request. Please try again and if it fails too, check the
DHCP server.

Static IP configure

failed

The static IP is not valid. Please check the IP
configuration.

Network connection

fail

The registering is failed by network failure. Please
check the network status and IP configuration.

Out of range

The phone is off from signaling area. Please move
to signaling area.

Disconnected by

network failure

The signaling is failed by network failure. Please
check network status.

IP is duplicated

Please check the IP is used in other device.

User Info not reg-

istered

The SIP registration data is not registered on the
system. Please set the data to register, such as
phone number and password.

Register failed.

Please check user

info

System responded error message on registering
request. Please check SIP information such as
password.

Please check phone

number

The phone number is not defined on the system.
Please check the system login IDs on Menu 443.

Can't register to

system

System responded error message on registering
request. Please check the SIP configuration of the
phone and system.

Summary of Contents for IPECS WIT-400HE


























































































































Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands

LG-Ericsson IPECS WIT-400HE, User Manual

Search results

Summary of Contents for IPECS WIT-400HE

Reviews:

Related manuals for IPECS WIT-400HE

Brands by name

Popular brands