Lexmark XM1135, Service Manual

Page: 98 / 510

200 paper jams
200 paper jam messages
Notes:
•
Some error messages are applicable only to printer models with installed polygon LSU (laser scanning
unit).
•
If the sixth digit character assigned to the serial number of the printer is in the P–Z range, then the
printer is installed with a polygon LSU (example: 4514 2ZHH 007CR).
Error code Description Action
200.01 Input sensor covered during warm-up sequence. Go to “Sensor (input) static jam service check”
on page 100 .
200.02 Input sensor covered too quickly. Go to “Sensor (input) early/late arriving service
check” on page 100 .
200.03 Media did not reach input sensor from MPF. Go to “Sensor (input) early/late arriving service
check” on page 100 .
200.05 Input sensor covered too long. Go to “Sensor (input) early/late arriving service
check” on page 100 .
200.07 Input sensor failed to become uncovered from
sheet ahead. Go to “Sensor (input) early/late arriving service
check” on page 100 .
200.08 Page arrive at input senor at unexpected time. Go to “Sensor (input) early/late arriving service
check” on page 100 .
200.09 Printhead did not receive proper motor feedback
to start laser servo. Go to “Sensor (input) image jam service check”
on page 102 .
200.10 Printhead motor not locked when media reaches
the input sensor. Go to “Sensor (input) image jam service check”
on page 102 .
200.11 Printhead motor fell out of lock after page reaches
the input sensor. Go to “Sensor (input) image jam service check”
on page 102 .
Mirror motor got locked, and then lost it again
before the initial lock timeout. Go to “Laser scanning unit (LSU) service check”
on page 152 .
200.12 Printhead was not ready for media. Go to “Sensor (input) image jam service check”
on page 102 .
200.13 Media at input sensor is not the next media to be
imaged. Go to “Sensor (input) image jam service check”
on page 102 .
200.14 Media reached the input sensor before EP was
ready. Go to “Sensor (input) image jam service check”
on page 102 .
200.15 Image data did not start on time. Go to “Sensor (input) image jam service check”
on page 102 .
200.16 Fuser motor stalled. Go to “Main drive motor control jam service
check” on page 103 .
200.19 Page that was successfully picked from option tray
never reached the input sensor. Go to “Sensor (input) early/late arriving service
check” on page 100 .
7015
Diagnostics and troubleshooting
98