manualshive.com logo in svg

Lexmark XM1135, Service Manual

The Lexmark XM1135 is a powerful multifunction printer designed for efficient performance in small to medium-sized offices. To help you get the most out of this device, we provide a Service Manual available for free download at manualshive.com, offering comprehensive instructions and insights for seamless operation and maintenance.

Share
Download
background image

Part name index

P/N

Part name

Page

40X9131

100

‑

sheet MPF tray (MX51x and XM1145)............................................................................................... 426

40X7567

1GB DDR3 DIMM.............................................................................................................................................461

40X8305

250-sheet media tray insert (MX51x and XM1145)............................................................................... 426

40X8287

250-sheet tray............................................................................................................................................... 456

40X8303

250-sheet tray insert (MX31x, MX41x, and XM1140—standard tray only)....................................... 426

40X8528

250-sheet tray insert (option tray only)................................................................................................... 456

40X7445

2GB DDR3 DIMM........................................................................................................................................... 461

40X8302

50

‑

sheet MPF tray (MX31x, MX41x, and XM1140)................................................................................. 426

40X8286

550-sheet tray............................................................................................................................................... 456

40X8529

550-sheet tray insert (option tray only.................................................................................................... 456

40X9654

550-sheet tray, lockable............................................................................................................................. 456

41X2300

Access cover link.......................................................................................................................................... 426

40X8262

ACM assembly (option tray only).............................................................................................................. 456

41X0919

ACM assembly (standard tray only)..........................................................................................................448

41X0959

ACM assembly (standard tray only)..........................................................................................................453

40X8265

ACM clutch......................................................................................................................................................448

40X7858

Adapter, 802.11B/G/N 

‑

 US........................................................................................................................... 461

40X4826

Adapter, N8120 GB INA................................................................................................................................ 461

40X9652

Adapter, N8130 10/100 fiber........................................................................................................................ 461

40X4823

Adapter, parallel 1284

‑

B THCK................................................................................................................... 461

40X4819

Adapter, RS232C serial................................................................................................................................ 461

40X9059

ADF assembly (MX31x)................................................................................................................................ 429

40X9057

ADF assembly (MX41x and XM1140)........................................................................................................ 429

40X9093

ADF assembly (MX51x and XM1145)........................................................................................................ 429

40X9118

ADF cable (MX31x, MX41x, and XM1140).................................................................................................429

40X9117

ADF cable (MX51x and XM1145)................................................................................................................ 429

40X9054

ADF input tray................................................................................................................................................ 428

40X9129

ADF left hinge ............................................................................................................................................... 428

40X8736

ADF pick roller............................................................................................................................................... 429

40X8734

ADF right hinge (MX31x, MX41x, and XM1140).......................................................................................428

40X7546

ADF right hinge (MX51x and XM1145)...................................................................................................... 428

40X6247

ADF separator pad (simplex)......................................................................................................................428

7015

Part name index

503

Summary of Contents for XM1135































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XM1135

Samsung M267x series Quick Installation Manual preview
M267x series
Brand: Samsung Pages: 2
Samsung CLX-6220FX Quick Install Manual preview
CLX-6220FX
Brand: Samsung Pages: 2
Samsung CLX-3305FW Manual Del Usuario preview
CLX-3305FW
Brand: Samsung Pages: 341
Samsung CLX-3170 Quick Install Manual preview
CLX-3170
Brand: Samsung Pages: 8
Samsung CLX2160N - Color Laser - All-in-One Manual Del Usuario preview
CLX2160N - Color Laser - All-in-One
Brand: Samsung Pages: 118
Samsung CLX 3160FN - Color Laser - All-in-One Manual Del Usuario preview
CLX 3160FN - Color Laser - All-in-One
Brand: Samsung Pages: 142
Samsung CLP-770ND - Color Laser Printer Quick Install Manual preview
CLP-770ND - Color Laser Printer
Brand: Samsung Pages: 2
Samsung CLP 610ND - Color Laser Printer Manual Del Usuario preview
CLP 610ND - Color Laser Printer
Brand: Samsung Pages: 114
Samsung CLP 500 Instructions Manual preview
CLP 500
Brand: Samsung Pages: 6
Samsung CLP 500 Paigaldusjuhend preview
CLP 500
Brand: Samsung Pages: 15
Samsung CLP 600N - Color Laser Printer User Manual preview
CLP 600N - Color Laser Printer
Brand: Samsung Pages: 227
Samsung CLP 600N - Color Laser Printer Manual Del Usuario preview
CLP 600N - Color Laser Printer
Brand: Samsung Pages: 118
Samsung CLP 300N - Network-ready Color Laser Printer Manual De Usuario preview
CLP 300N - Network-ready Color Laser Printer
Brand: Samsung Pages: 94
Samsung CJX-2000FW Series Quick Install Manual preview
CJX-2000FW Series
Brand: Samsung Pages: 2
Samsung 4116 - SCX B/W Laser User Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 205
Samsung 3561ND - B/W Laser Printer User Manual preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 252
Samsung 3561ND - B/W Laser Printer Manual Del Usuario preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 127
Samsung CLX-3305FN User Manual preview
CLX-3305FN
Brand: Samsung Pages: 314

Brands by name

Popular brands

Load more brands