Lexmark XM1135 Service Manual Download | Manualshive

Page: 2 / 510

background image

Product information

Product name:

LexmarkMX310, MX317, MX410, MX417, MX510, MX511, MX517de, XM1135, XM1140, and XM1145 MFPs

Machine type:

7015

Model(s):

270, 279, 470, 479, 630, 670, 675, 679

Edition notice

October 03, 2018

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK

INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement
may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information
herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described
may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available
in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that
product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any
existing intellectual property right may be used instead. Evaluation and veriﬁcation of operation in conjunction with other products,
programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

Trademarks

Lexmark and the Lexmark logo are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer
commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language.
This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions
corresponding to the commands.

PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.

All other trademarks are the property of their respective owners.

© 2017 Lexmark International, Inc.

All rights reserved.

P/N 12G2376

7015

«
1
2
3
4
...
»

Summary of Contents for XM1135































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XM1135

Brand: Oki Pages: 2

OKIPAGE 8c Plus

Brand: Oki Pages: 48

Brand: Oki Pages: 257

Brand: Oki Pages: 113

Brand: Oki Pages: 26

Brand: Oki Pages: 183

Brand: Oki Pages: 36

Brand: Oki Pages: 136

Brand: Oki Pages: 66

Brand: Oki Pages: 123

Brand: Oki Pages: 109

Brand: Oki Pages: 68

Brand: Oki Pages: 12

Brand: Oki Pages: 22

Brand: Oki Pages: 22

Brand: Oki Pages: 27

OKIPAGE 12i Series

Brand: Oki Pages: 210

OKIPAGE 12i Series

Brand: Oki Pages: 169

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands