Lexmark X95x, Service Manual

Page: 342 / 1153

3-6
Service Manual
7558- xxx
Go Back
Previous
Next
Configuration Menu
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold the
2
and
6
buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available settings
Settings appear on the LCD in the order shown:
Reset Separator Roll and Pick
Assembly Counter
See
“Reset Separator Roll and Pick Assembly Counter”
on page 3-14
.
Reset Maintenance Counter
See
“Reset Maintenance Counter Value” on page 3-14
.
REGISTRATION See
“REGISTRATION” on page 3-13
.
USB Scan to Local
See
“USB Scan to Local” on page 3-16
.
Black Only Mode See
“Black Only Mode” on page 3-8
.
Print Quality Pages See
“Print Quality Pages” on page 3-13
.
Reports See
“Reports” on page 3-14
.
Color Trapping
See
“Color Trapping” on page 3-9
.
Tray Insert Msg See
“Tray Insert Message Delay” on page 3-15
.
SIZE SENSING
See
“Size Sensing” on page 3-15
.
Exit Tray 2 See
“Exit Tray 2” on page 3-10
.
Panel Menus See
“Panel Menus” on page 3-13
.
PPDS Emulation See
“PPDS Emulation” on page 3-13
.
Download Emuls
Factory Defaults See
“Factory Defaults” on page 3-10
.
Energy Conserve
See
“Energy Conserve” on page 3-9
.
Fax Low Power Support See
“Fax Low Power Support” on page 3-10
.
Min Copy Memory See
“Min Copy Memory” on page 3-12
.
NumPad Job Assist See
“NumPad Job Assist” on page 3-12
.
Format Fax Storage
See
“Format Fax Storage” on page 3-11
.
Fax Storage Location See
“Fax Storage Location” on page 3-11
.
Auto Align Adj
See
“Automatic Alignment Adjust Calibration” on
page 3-8
.
ADF Edge Erase
See
“ADF Edge Erase” on page 3-8
.
FB Edge Erase See
“FB Edge Erase” on page 3-11
.