Lexmark X746, User Manual

Page: 287 / 350

C
HECK IF A SUPPLY IS MISSING OR NEEDS REPLACEMENT
Remove and then reinstall or replace the supply.
C
HECK IF THE STANDARD EXIT BIN IS FULL
Remove the paper stack from the standard exit bin.
C
HECK IF THE PAPER TRAY IS EMPTY
Load paper in the tray.
M
AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED
• Verify that you are using the correct printer software.
• If the printer is connected to your computer through a USB port, then make sure you are running a supported
operating system and using a compatible printer software.
M
AKE SURE THE INTERNAL PRINT SERVER IS WORKING PROPERLY
•
Make sure the internal print server is properly installed and that the printer is connected to the network.
•
Print a network setup page and check that the status shows
Connected
. If the status is
Not Connected
,
then check the network cables, and then try printing the network setup page again. Contact your system support
person to make sure the network is functioning correctly.
The printer software is available on the Lexmark Web site at http://support.lexmark.com .
M
AKE SURE YOU ARE USING A RECOMMENDED
USB,
SERIAL
,
OR
E
THERNET CABLE
For more information, visit the Lexmark Web site at http://support.lexmark.com .
M
AKE SURE PRINTER CABLES ARE SECURELY CONNECTED
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.
Confidential and other held jobs do not print
These are possible solutions. Try one or more of the following:
P
ARTIAL JOB
,
NO JOB
,
OR BLANK PAGE PRINTS
The print job may contain a formatting error or invalid data.
•
Delete the print job, and then print it again.
•
For PDF documents, recreate the PDF and then print it again.
Troubleshooting 287