6
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note:
After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
7
Follow the instructions on the computer screen.
Note:
For more information on allowing other computers on the network to use the wireless printer, see the
Networking Guide
.
Installing the printer on a wireless network (Macintosh)
Note:
Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1
2
2
Locate the printer MAC address.
a
From the printer control panel, navigate to:
>
Reports
>
>
Network Setup Page
>
or
>
Reports
>
Network Setup Page
b
In the Standard Network Card section, look for
UAA (MAC)
.
Note:
You will need this information later.
Additional printer setup
50
