Lexmark X746 User Manual Download Page 316

Page: 316 / 350

Clean the paper feed rollers.

Warning—Potential Damage:

Do not touch the rubber. Doing so will damage the rollers.

Reinstall the paper feed rollers.

Note:

Make sure to replace the worn or defective paper feed rollers.

Solid color pages

AKE

SURE

THE

PHOTOCONDUCTOR

NOT

DEFECTIVE

AND

INSTALLED

CORRECTLY

Remove and then reinstall the photoconductor. If the problem continues, then the photoconductor may need to be
replaced.

Black or white streaks appear on transparencies or paper

Try one or more of the following:

NSURE

THAT

THE

FILL

PATTERN

CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

HECK

THE

PAPER

TYPE

•

Use only the recommended transparencies.

•

Ensure that the Paper Type setting matches what is loaded in the tray or feeder.

•

Ensure that the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or
feeder.

Troubleshooting

316

Summary of Contents for X746































































































































































































































































































































































Search results

Summary of Contents for X746

Reviews:

Related manuals for X746

Brands by name

Popular brands

Lexmark X746, User Manual

Search results

Summary of Contents for X746

Reviews:

Related manuals for X746

Brands by name

Popular brands