To install a printer hard disk onto the ISP:
a
Using a flathead screwdriver, loosen the screws.
b
Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.
c
Install the printer hard disk onto the ISP:
1
Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk
to the holes in the ISP.
2
Press down on the printer hard disk until the standoffs are in place.
Warning—Potential Damage:
Do not press on the center of the printer hard disk. Doing so may cause damage to
the hard disk.
d
Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.
Note:
The plugs and receptacles are color
‑
coded.
Additional printer setup
38