Lexmark T 430, Service Manual

Page: 55 / 249

Diagnostic information
2-21
4048-1xx
58 Too Many
Flash Options
This error displays when too many flash options
are installed in the printer.
The following options may be taken:
• Turn off the printer and remove the extra flash
options.
• Press Go to clear the message. The extra
flash options are ignored.
59 Incompatible
Tray
x
An incompatible tray is installed. For Tray x,
x= 2 or 3.
Remove
the
incompatible tray and press Go to
clear the message.
Note: If the user installed the incompatible
device to satisfy a Check Device Connections/
reattach message, the user should reinstall an
associated compatible option or hot unplug the
option.
80 Scheduled
Maintenance
Replace the fuser assembly, transfer roller,
charge roll, and pick rolls at this recommended
interval to maintain the print quality and
reliability of the printer. The parts are available
as a maintenance kit. For more information, see
“Scheduled maintenance” on page 6-2 .
81 Engine Code
CRC Failure This error displays when the microcode to be
programmed in the engine flash code module
has failed a CRC check. Press Go to clear the
message. The microcode data is discarded and
must be re-transmitted from the host.
88 Toner Low This message displays when toner low occurs
and the toner low alarm is activated. Press Go
to clear this message.
User attendance messages (continued)
Message Explanation