Lexmark T 430, Service Manual

Page: 51 / 249

Diagnostic information
2-17
4048-1xx
37 Insufficient
Collation Area
This message displays when the printer memory
is insufficient to perform the Flash Memory
Defragment operation.
Note: This message is posted prior to the
actual start of the defragment operation. The
printer code determines if enough printer
memory is available to complete the defragment
operation. The user should not be concerned
with losing resources stored in the flash option.
The following actions may be taken:
• Press Go to clear the message.
• Press Menu until
Busy/Waiting
appears.
The following actions are available:
– Cancel Job
– Reset Printer
37 Insufficient
Defrag Memory
This message displays when the printer memory
is fragmented. Defragmentation is required and
additional memory is required to complete the
task.
• Press Go to clear the message.
Defragmentation will not continue and no
changes are made to memory and no
resources are lost.
• Press Menu until Busy/Waiting appears.
The following functions may be available:
– Cancel Job
– Reset Printer
The user may clear memory for a
defragmentation by:
• Deleting fonts, macros, and other data in
RAM.
• Installing additional memory.
User attendance messages (continued)
Message Explanation