Lexmark T 430, Service Manual

Page: 46 / 249

2-12
Service Manual
4048-1xx
Change < input source >
< type >< size >
This message displays when the user should
change the media installed in one of the input
options.
• <input source>=Tray 1, Tray 2, Tray 3, or MP
feeder.
• <type>=Bond, Card stock, Colored, Envelope,
Labels, Ltrhead, Plain, Preprint, or
Transparency.
• <size>=letter, legal, B5, A4, Executive,
Universal, A5, Folio, or Statement. For
envelopes, <size>=7¾ Envelope, 9 Envelope,
10 Envelope, DL Envelope, C5 Envelope,
B5 Envelope, or other Envelope.
Check Tray x
Connection
Tray x=Tray 2 or Tray 3.
This messages displays for the following
conditions:
• The specified device may have been removed
from the printer, possibly to clear a paper jam
or to uninstall the option.
• The option may be attached to the printer, but
a communications problem may prevent the
printer from detecting the option. For
example, there may be a poor connection or a
hardware failure.
The following actions may be taken:
• If the option was temporarily removed or not
connected properly, reattach or reconnect it.
• Press Go to execute a configuration change
which notifies the printer the option has been
hot unplugged (removed with the power on).
Note: This action is not available if the printer
is in Diagnostics Mode or running diagnostics.
• If the device is experiencing a hardware
problem, turn the printer off and on.
Close Door Close the upper front door.
User attendance messages (continued)
Message Explanation