Lexmark T 430, Service Manual

Page: 98 / 249

3-4
Service Manual
4048-1xx
REGISTRATION
To set print registration:
1. Select REGISTRATION from the Diagnostics menu.
The Top margin sign/value pair blinks. This indicates it is the
margin value being changed.
2. To select the margin value to be changed press Select until the
margin value pair you want to change is blinking.
The print registration range is:
3. To change the margin value press Menu. When the value you
want displays, press Select to save the value.
To verify the margin values are correct, you must print the Quick
Test page. Press Go to print the test page. While printing,
Quick Test Printing
displays. Once the Quick Test page
completes printing, the registration screen displays again.
4. To exit, press Return.
5. Test the setting by printing the Quick Test page for all the
source, see “PRINT TESTS” on page 3-5 . Select all the
available sources. To test the Duplex sources, see “DUPLEX
TESTS” on page 3-9
Print the Quick Test Page on letter or A4 paper.
T=sxx* B=sxx*
L=sxx* R=sxx*
Variable Description Value
s sign blank for positive values, “-” for
negative values
B= Bottom margin -20 to +20—Each increment causes
approximately 0.55 mm shift in the
bottom margin.
T= Top margin -16 to +16
L= Left margin -25 to +25
R= Right margin -10 to +10