Lexmark T 430, Service Manual

Page: 63 / 249

Diagnostic information
2-29
4048-1xx
84 xx 30 00
00 00
Input sensor never became uncovered
from page ahead while trying to feed
media out of path during warm-up. Paper
originally detected at option tray pass thru
sensor.
• Clear the media or debris from the
printer.
• Enter Diagnostics and perform the
Base Sensor test to verify the proper
function of the input sensor. See
“Entering Diagnostic Mode” on
page 3-2
and “BASE SENSOR TEST”
on page 3-14 .
200
84 00 08 Paper at input sensor when not expected
during printing. Possible cause is multiple
sheets picked. 200
84 00 10
The main motor driver failed to detect a
specific motor after two tries. Possible
causes for this error are:
• The main drive motor has stalled.
• An incorrect main drive motor/gearbox
assembly has been installed.
200
84 00 31 00
00 00 Trailing edge never cleared input sensor
when feeding out media that was
detected during warm-up.
• Clear the media or debris from the
printer.
• Enter Diagnostics and perform the
Base Sensor test to verify the proper
function of the exit sensor. See
“Entering Diagnostic Mode” on
page 3-2
and “BASE SENSOR TEST”
on page 3-14 .
200
Sub error codes (continued)
First 6 bytes sub
error code data
(xx can be any
value)
Explanation
Possible
error
message