Lexmark T 430, Service Manual

Page: 52 / 249

2-18
Service Manual
4048-1xx
37 Insufficient
Memory
Held Jobs may be
lost
This message displays when there is not
enough memory available to continue
processing a job and Print and Hold feature is in
use. The printer frees memory by deleting the
oldest Reserve Print and Verify Print jobs. It
deletes only the amount needed to continue the
incoming job. Some or all of the jobs may not be
restored. If, while printing the current job, it runs
out of memory again, another message is not
posted.
• Press Go to clear the message. Some of the
Print and Hold jobs on the disk will not be
restored. They remain on the disk, but cannot
be accessed.
• Press Menu until Busy/Waiting appears.
The function, Reset Printer, may be
available.
38 Memory Full This message displays when the printer is
processing an incoming job and there is
insufficient memory available to continue
processing the job. The following actions may be
taken:
• Press Go to clear the message. Perform the
defragment operation:
– Simplify the print job.
– Delete fonts, macros, and other data in
RAM
– Install additional memory
• Press Menu to display Busy/Waiting . The
following functions may be available:
– Cancel Job
– Reset Printer
39 Complex Page This message displays when the page is too
complex to print. The following actions may be
taken:
• Press Go to clear the message and continue
the job. Some data loss may occur. Simplify
the print job and reprint, if necessary.
• Press Menu until
Busy/Waiting
appears.
The following selections are possible:
– Cancel Job
– Reset Printer
User attendance messages (continued)
Message Explanation