17
Attach all the power cords and power
up
Important:
The control panel does not have an ON/OFF switch. Be sure to
follow the preferred order of powering on: first the scan unit, and
then the printer.
a
Make sure the printer power is turned off and the printer power cord is
unplugged.
b
Using the diagram as a guide, connect the power supply to the control
panel.
c
Connect the power supply to the power cord, but do not plug the
power cord into the wall yet.
d
Connect the power supply of the scan unit.
e
If you purchased a MarkNet N2501e, plug the telephone fax line cable
into the phone line wall outlet.
f
Plug each of the power cords into a properly grounded electrical outlet.
The control panel power comes on automatically.
g
Plug the printer power cord back in.
h
Turn the scan unit on.
i
Turn on the printer.
8
Power cord
OptraImage control panel
Power supply
