9
Set up and configure
Install the MarkNet print server in the
printer
❏
If your printer shipped with the MarkNet N2501e or N2401e print server
already installed
, or if you installed one of these print servers during
your printer setup, skip to the next step.
See “Safety Information” on
page v for additional cautions
and warnings.
Caution:
Before installing the MarkNet N2501e print server in your printer,
make sure the fax/phone cable is not plugged into the card or the
wall outlet. Make sure your printer is unplugged.
MarkNet internal print
servers are sometimes called
printer option cards.
Install the MarkNet N2501e or N2401e print server in an available optional card
slot inside your printer. For detailed instructions about installing your print
server, refer to your printer setup documentation about installing option cards.
1
Ethernet 10/100
port (uses RJ-45
cable)
SCSI port (OptraImage
control panel attaches
here)
Fax Modem
port (uses RJ-11
cable)
MarkNet N2501e print server ports
MarkNet N2401e print server ports
SCSI port (OptraImage
control panel attaches
here)
Ethernet 10/100
port (uses RJ-45
cable)
