40
Set Collation/Finishing features
Turning collation ON
produces complete, ordered
copies of the original.
Collation
is turned off by default. To turn Collation on, press
Collation/Finishing
until you see
Collate
in the control panel display, and then
press Select.
Finishing
features (such as stapling or hole punch) are only available if your
printer supports finishing functions. If your printer does not support finishing,
and then only collation is supported on the control panel.
Save paper when you print
This process of saving paper is
sometimes referred to as N-up.
Some features share a panel
light. For example, the same
panel light is on for both 4-up
and 4-up Landscape printing.
There are five choices available in the Paper Saver menu. Press the Paper Saver
button until your selection appears in the control panel display.
Feature
Description
Off
N-up
copying is turned off (no choices lit). This is the
default setting.
2-up
copying transfers two originals to one copy.
The two originals are rotated and reduced in size to fit
onto a single sheet, as shown.
2-up Landscape
reduces your two originals to fit on a
single sheet of paper in landscape mode.
4-up
copying saves even more paper by transferring
four originals to one single-sided copy.
Your four originals are reduced to fit on a single sheet of
paper in portrait mode.
4-up Landscape
reduces your four originals to fit on a
single sheet of paper in landscape mode.
