v
Safety Information
Always follow all safety precautions when installing or using telephone equipment to
reduce the risk of fire, electric shock and injury to persons, including the following:
•
If your product is NOT marked with this symbol
, it MUST be connected to an
electrical outlet that is properly grounded.
•
The power supply must be connected to an electrical outlet that is near the product
and easily accessible.
•
Refer service or repairs, other than those described in the operating instructions, to
a professional service person.
•
This product is designed, tested and approved to meet strict global safety
standards with the use of specific Lexmark components. The safety features of
some parts may not always be obvious. Lexmark is not responsible for the use of
other replacement parts.
Fax/Telephone Safety Instructions
•
When installing the MarkNet N2501e print server containing the fax modem port,
follow all safety precautions of any equipment into which the card is being
installed.
•
Do not perform the setup procedures in this guide during a lightning storm.
•
Never install or use this equipment in wet locations.
•
Before attempting to access the printer compartment where the option card is
installed, you must remove the fax phone line cable first from the wall outlet, and
then from the fax modem port of the MarkNet print server.
