Lexmark Optra T522, User Reference Manual

Page: 79 / 215

77
26
Solving print quality problems
If the suggested corrective action does not fix the problem, call your service representative.
Problem Action
Print is too light. • The toner may be low. To utilize the remaining toner, remove the cartridge by
gripping the handles with both hands. With the cartridge arrows pointing
downward, shake the print cartridge back and forth. Reinstall the cartridge
and then press Go.
• Change the Toner Darkness setting in the Quality Menu.
• If you are printing on an uneven print surface, change the Paper Weight and
Paper Texture settings in the Paper Menu. See Paper Type .
• Verify that the correct print material is being used.
Toner smears or print comes
off the page. • If you are printing on an uneven print surface, change the Paper Weight and
Paper Texture settings in the Paper Menu. See Paper Type .
• Verify that the print material is within the printer specifications. See Print
material specifications for more details.
• If the problem continues, call the Lexmark Customer Support Center.
Toner appears on the back of
the printed page. Toner is on the transfer roll. To help prevent this, do not load print material that
is smaller than the page size of the job to be printed.
Open and close the printer upper front door to run the printer setup cycle and
clean the transfer roll.