Lexmark Optra T522 User Reference Manual Download Page 177

Page: 177 / 215

175

Factory Defaults

Purpose:

To return your printer settings to the factory default values.

Values:

Format Disk

Purpose:

To format the printer’s hard disk.

Values:

ARNING

Do not turn off the printer while the hard disk is formatting.

Format Flash

Purpose:

To format the flash memory.

Values:

ARNING

Do not turn off the printer while the flash is formatting.

Restore

• All menu items are returned to the factory default values except:

– Display Language.
– All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared

Menu, LocalTalk Menu, and USB Menu.

• All downloaded resources (fonts, macros, and symbol sets) in printer

memory (RAM) are deleted. (Resources residing in flash memory or on the
hard disk are unaffected.)

Do Not Restore

User-defined settings remain.

Yes

Deletes any data stored on the hard disk and prepares the device to receive new resources.

Cancels the request to format the hard disk and leaves current resources stored on the disk.

Yes

Deletes any data stored in flash memory and prepares the flash memory to receive new
resources.

Cancels the request to format the flash memory and leaves current resources stored in flash
memory.

Summary of Contents for Optra T522
























































































































































































































Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands

Lexmark Optra T522, User Reference Manual

Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands