Lexmark Optra T522 User Reference Manual Download Page 161

Page: 161 / 215

159

PostScript Menu

Use the PostScript Menu to change printer settings that only affect jobs using the PostScript emulation
printer language.

Select a menu item for more details:

Note: Values marked by an asterisk are the factory default settings.

Font Priority

Purpose:

To establish the font search order.

Values:

Note: Font Priority is only displayed when a formatted flash or hard disk is installed and

is neither defective nor Read/Write or Write protected.

Print PS Error

Purpose:

To print a page defining the PostScript emulation error when an error occurs.

Values:

•

Font Priority

•

Print PS Error

Resident*

Printer searches printer memory for the requested font before searching flash
memory or hard disk.

Flash/Disk

Printer searches the hard disk and flash memory for the requested font before
searching printer memory.

Off*

Discards the print job without printing an error message.

Prints an error message before it discards the job.

Summary of Contents for Optra T522
























































































































































































































Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands

Lexmark Optra T522, User Reference Manual

Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands