Lexmark Optra T522, User Reference Manual

Page: 50 / 215

48
16
Replacing the print cartridge
Order a new print cartridge when the
Toner Low
message first appears so you will have it when the
current one no longer prints satisfactorily. See Ordering supplies for information on ordering print
cartridges.
Note: We do not recommend that you use print cartridges from a third party. Print quality
and printer reliability cannot be guaranteed if you do. For best results, use Lexmark
supplies.
To utilize the remaining toner, remove the cartridge by gripping the handles with both hands. With the
cartridge arrows pointing downward, shake the print cartridge back and forth. Reinstall the cartridge
and then press
Go
.
Complete the following steps to replace the print cartridge. Refer to the documentation that comes with
the print cartridge for detailed installation information.
1
Turn the printer off and unplug the printer power cord.
2
Open the front doors and remove the used print cartridge.
W
ARNING
:
Never touch the photoconductor drum on the underside of the print cartridge. Use
the handhold on the cartridge to avoid touching this area.
3
Clean the printer.
4
Install the new print cartridge and close the front door.
5
Replace the fuser cleaner if you are printing special label applications.
6
Plug the printer power cord into a properly grounded electrical outlet and turn the printer on.
7
Follow the instructions on the new print cartridge box to return the used print cartridge to
Lexmark for recycling.
When you return a used print cartridge, you contribute to a worldwide recycling effort at no
cost to you.
Note: The print cartridge warranty is voided by unauthorized refilling.