Lexmark Optra T522 User Reference Manual Download Page 76

Page: 76 / 215

Solving display problems

If the suggested corrective action does not fix the problem, call your service representative.

Problem

Action

Operator panel displays only
diamonds or is blank.

• Turn the printer off, wait about 10 seconds, and turn the printer on.
•

Performing Self Test

appears on the display. When the test is

completed,

Ready

is displayed.

If the messages do not appear, turn the printer off and call the Lexmark
Customer Support Center.

Menu settings changed from
the operator panel have no
effect.

Settings in the software application, the printer driver, or the printer utilities are
overriding the settings made from the operator panel.

• Change the menu settings from the printer driver, the printer utilities, or the

software application instead of the operator panel.

• Disable the settings in the printer driver, the printer utilities, or the software

application so you can change settings from the operator panel.

Summary of Contents for Optra T522
























































































































































































































Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands

Lexmark Optra T522, User Reference Manual

Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands