Lexmark Optra T522 User Reference Manual Download Page 184

Page: 184 / 215

182

Removing options

Keep the following guidelines in mind when removing any options:

•

Remove all print material from any option before removing it from the printer.

•

To remove any input option, you must first remove the printer and any options installed above
it.

•

Remove paper options individually; never attempt to remove two or more paper options at
once.

•

Make sure the printer power is off and the power cord and any cables are unplugged before
removing any options.

For more information, click a topic:

•

Removing the envelope
feeder

•

Removing printer or flash
memory

•

Removing a paper tray or
duplex unit

•

Removing an option card

Summary of Contents for Optra T522
























































































































































































































Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands

Lexmark Optra T522, User Reference Manual

Search results

Summary of Contents for Optra T522

Reviews:

Related manuals for Optra T522

Brands by name

Popular brands