Lexmark MX320 Series User Manual Download

Page: 9 / 146

What are you looking for?

Find it here

The latest supplemental information, updates, and customer
support:

•

Documentation

•

Driver downloads

•

Live chat support

•

mail support

•

Voice support

http://support.lexmark.com

Note:

Select your country or region, and then

select your product to view the appropriate
support site.

Support contact information for your country or
region can be found on the support Web site or on
the printed warranty that came with the printer.

Have the following information (located on the store
receipt and at the back of the printer) ready when
you contact customer support:

•

Machine type number

•

Serial number

•

Date purchased

•

Store where purchased

•

Safety information

•

Regulatory information

•

Warranty information

Warranty information varies by country or region:

•

In the U.S.

—See the Statement of Limited

Warranty included with the printer, or go to

http://support.lexmark.com

•

In other countries and regions

—See the

printed warranty that came with the printer.

Product Information Guide

—This document

contains basic safety, environmental, and
regulatory information for your product. For more
information, see the documentation that came with
the printer or go to

http://support.lexmark.com

Selecting a location for the printer

•

Leave enough room to open trays, covers, and doors and to install hardware options.

•

Set up the printer near an electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not place or use this product

near water or wet locations.

•

Make sure that airﬂow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.

•

Provide a ﬂat, sturdy, and stable surface.

•

Keep the printer:

–

Clean, dry, and free of dust

–

Away from stray staples and paper clips

–

Away from the direct airﬂow of air conditioners, heaters, or ventilators

–

Free from direct sunlight and humidity extremes

•

Observe the recommended temperatures and avoid ﬂuctuations.

Learning about the printer

Summary of Contents for MX320 Series



















































































































































Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands

Lexmark MX320 Series, User Manual

Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands