Lexmark MX320 Series User Manual Download

Page: 108 / 146

Unpack the optional tray, and then remove all packing material.

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or

more trained personnel to lift it safely.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

If necessary, manually add the tray in the print driver to make it available for print jobs. For more information,
see

“Adding available options in the print driver” on page 109

Install the printer and hardware options in the following order:

•

Optional 550

sheet tray

•

Printer

Upgrading and migrating

108

Summary of Contents for MX320 Series



















































































































































Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands

Lexmark MX320 Series, User Manual

Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands