Lexmark MX320 Series User Manual Download Page 59

Page: 59 / 146

•

Flex, fan, and align the paper edges before loading.

•

Do not use paper that has been cut or trimmed by hand.

•

Do not mix paper sizes, weights, or types in the same tray.

•

Make sure that the paper size and type are set correctly on the computer or printer control panel.

•

Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:

•

When Jam Assist is set to On, the printer automatically ﬂushes blank pages or partially printed pages
with after a jammed page is cleared. Check your printed output for blank pages.

•

When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Jam location

Automatic document feeder

Standard bin

Rear door

Duplex unit

Tray

Multipurpose feeder

Front door

Clearing jams

Summary of Contents for MX320 Series



















































































































































Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands

Lexmark MX320 Series, User Manual

Search results

Summary of Contents for MX320 Series

Reviews:

Related manuals for MX320 Series

Brands by name

Popular brands